Ley de Ohm
La ley de Ohm establece que la intensidad 
eléctrica que circula entre dos 
puntos de un circuito 
eléctrico es directamente 
proporcional a la tensión 
eléctricaentre dichos puntos, existiendo una constante de proporcionalidad 
entre estas dos magnitudes. Dicha constante de proporcionalidad es la conductancia 
eléctrica, que es inversa a la resistencia 
eléctrica.
La 
ecuación matemática que describe esta relación es:
donde, I es la corriente que pasa a través del objeto 
en amperios, V es la diferencia de potencial de las 
terminales del objeto en voltios, G es la conductancia ensiemens y R es la resistencia en ohmios (Ω). Específicamente, la ley de Ohm dice que 
la R en esta relación es constante, 
independientemente de la corriente.1
Esta 
ley tiene el nombre del físico alemán Georg Ohm, que en un tratado 
publicado en 1827, halló valores de tensión y corriente que pasaba a través de 
unos circuitos eléctricos simples que contenían una gran cantidad de cables. Él 
presentó una ecuación un poco más compleja que la mencionada anteriormente para 
explicar sus resultados experimentales. La ecuación de arriba es la forma 
moderna de la ley de Ohm.
Esta 
ley se cumple para circuitos y tramos de circuitos pasivos que, o bien no tienen cargas inductivas ni capacitivas (únicamente tiene cargas resistivas), o bien 
han alcanzado un régimen 
permanente (véase también «Circuito 
RLC» y «Régimen 
transitorio (electrónica)»). También debe tenerse en cuenta que el valor de 
la resistencia de un conductor puede ser influido por la temperatura.

Ohm's Law
Ohm's law states that the electrical current flowing between two points in an electrical circuit is directly proportional to the voltage eléctricaentre these points, there being a constant of proportionality between these two magnitudes. This proportionality constant is the electrical conductance, which is opposite to the electrical resistance.
The mathematical equation describing this relationship is:
where I is the current passing through the object in amperes, V is the potential difference of the terminals of the object in volts, G is the conductance ensiemens and R is the resistance in ohms (Ω). Specifically, Ohm's law states that the R in this ratio is constant regardless of the corriente.1
This law is named after the German physicist Georg Ohm, who in a treatise published in 1827, found values of voltage and current passing through a simple electrical circuits containing a large number of cables. He presented a slightly more complex equation as mentioned above to explain the experimental results. The above equation is the modern form of Ohm's law.
This law holds for circuits and passive circuit sections that either have no inductive or capacitive (resistive loads only is) or have reached a steady state (see also "RLC circuit" and "Transitional arrangements (electronic)" .) Should also be noted that the value of the resistance of a conductor can be influenced by temperature.
esta muy bien esa información!!!
ResponderEliminar